Products

Your Dream, DONGTAI Create——Ideas for Intelligent Knitting

Home

Brief Description of Unloading & Installation Cautions for Dongtai Circular Knitting Machines

Release time:

2022-12-13

●Please carry the machine with more than 3 tons forklift. ●Before the machine is located at workshop, please do not put the machine in moist place in case of rust. ●When unload, the wood must be stowed on the arms of the forklift to avoid self movement of machines.

UNLOADING & INSTALLATION CAUTIONS

1. How to unload?

●Please carry the machine with more than 3 tons forklift.

●Before the machine is located at workshop, please do not put the machine in moist place in case of rust.

●When unload, the wood must be stowed on the arms of the forklift to avoid self movement of machines.

2. Installation environment

●Location without dripping, smoke, dust and oily dust.

●Location without gas or liquid with causticity and flammability.

●Location without floating dust and metal atom.

●Location without risk of shake level.

●Location without electromagnetism noise and interference.

3. Location

●When carrying the forklift, please keep the machine 30-50cm above the ground. Do not carry on bump road.

●Before locating the machine in the its position, please measure the space with the superficial measure of the machine and creel.

●After placing the machine in the location, please use gradienter to calibrate the machine level. The tolerance must be less than ±0.3mm.

4. Assembling of creel

●Assemble the creel as the above picture.

●Use thick aluminum stick(release yarns) for the back creel and use thin aluminium stick(release yarn presser)for the front side of creel.

●The aluminum stick of yarn feeding should be higher than the aluminum stick of yarn pressing so as to guarantee bobbin yarns’ yielding when yarn threading.

●The distance between each yarn-barbs should be almost equal so as to prevent yarn yielding.

Recent Posts